1616Record images on the SD memory card manuallyImages displayed on the "Live" page can be recorded on the SD memory card manually.This button is operable only when "Manual" is selected for "Save trigger" on the [SD memory card] tab of the"Basic" page of the setup menu. (☞ page 34)It is possible to select "JPEG" or "H.264" on "Recording format" of the setup menu. (☞ Page 33) When "JPEG" isselected for "Recording format", still image data are recorded. When "H.264" is selected, video data are recorded.Images recorded on the SD memory card can be copied onto the PC. (☞ Page 38)Step 1Display the "Live" page. (☞ Page 6)Step 2Click the [SD] button.→ The SD recording window will open.Step 3Click the [Start] button to start recording images on theSD memory card. The SD recording status indicator willlight red (☞ Page 9) while images are being recordedon the SD memory card.The save interval (frame rate) can be configured on the[SD memory card] tab of the "Basic" page. (☞ Page 35)Step 4Click the [Stop] button to stop saving images on the SDmemory card.Step 5Click the [Close] button to close the window.Note:• It is possible to obtain image data saved on Drive Bby clicking the [Execute] button of "Access img." onthe [SD memory card] tab and by logging in thecamera to access images from the user authentica-tion window. (☞ page 38)The destination directory to which data are to besaved will be a fixed directory on Drive B. Refer tothe "Directory structure of drive B" section. (☞ page141)• When the [Start] button is clicked immediately afterthe [Stop] button is clicked, saving of images maynot start. In this case, click the [Start] button again.
