Panasonic WV-SC384 Operating Instructions Manual

Also see for WV-SC384: Integration note Product catalog Installation guide Operating instructions Specifications

Contents

Panasonic WV-SC384 Operating Instructions Manual Manual pdf 74 page image

7474Configure the multi-screen settings [Multi-screen]The cameras from which images are to be displayed on a multi-screen can be registered on the "Multi-screen"page. (☞ Pages 26 and 27: How to display/operate the setup menu)[IP address]Enter the IP address or the host name of the camera tobe used for the multi-screen. 4 cameras can be regis-tered as a group and up to 4 groups (16 cameras) canbe registered.When the HTTP port number for the camera of whichimages are to be displayed had been changed, enter asfollows:Example of entry:Example when entering an IPv4 address:http://192.168.0.10:8080Example when entering an IPv6 address:http://[2001:db8:0:0:0:0:0:1]:8080Available number of characters: 1 - 128 charactersTo access the cameras using the HTTPS protocol, enteras follows:Example of entry: https://192.168.0.10/Important:• When accessing the camera using the HTTPS pro-tocol, install the security certificate of the camera todisplay images on the monitor. (☞ Page 106)Note:• When using the host name, it is necessary to con-figure the DNS settings of the PC to be used for themulti-screen display. (☞ Page 94)[Camera title]Enter the title of the camera. The entered camera titlewill be displayed on a multi-screen.Available number of characters: 0 - 20 charactersUnavailable characters: "&Note:• When selecting a 16 split-screen, some charactersof the camera title to be displayed may not be dis-played.• Even when "16:9" is selected for "Aspect ratio", themulti-screen is displayed in 4:3.