59Configure the settings relating to image quality ("Image adjust" setupmenu) SW395 SC385Click the [Setup >>] button of "Image adjust" on the [Image/Position] tab of the "Image/Audio" page. (☞ Page 58)The settings relating to image quality can be configured with the setup menu displayed in a newly displayed win-dow. When the values are changed, the changed values will be applied to the currently displayed image on the[Image/Position] tab.[Super Dynamic(SD)]Select "On" or "Off" to determine whether or not toactivate the super dynamic function.Refer to the description "Super Dynamic function"about the super dynamic function.On: The super dynamic function will work.Off: The super dynamic function will not work.Default: OffNote:• When the following are observed depending on thelight condition, select "Off" for "SuperDynamic(SD)".• When flickering appears or the color changes on thescreen• When noise appears in the brighter area on thescreen• When "Outdoor scene" or "Indoor scene" isselected for "Light control mode", this setting isavailable.Super Dynamic functionWhen there is wide variation between the illumina-tion of light and dark areas of the location beingmonitored, the camera adjusts the lens iris in accor-dance with the brighter areas. This causes loss ofdetail in darker areas. Conversely, adjusting the lensbrightness for the darker areas causes the brighterareas to become washed out.Super Dynamic digitally combines an image that isset up for a clear view of the brighter areas with animage that is set up for a clear view of the darkerareas, creating a final image that preserves overalldetail.Subject in the dark areais hard to notice...Subject in the bright areais washed out...Creates a clearer imageby digitally combiningimages[Face SD]Select "On" or "Off" to determine whether or not tointeract with the Super Dynamic function.On: The interactive control with face detection willwork.Off: The interactive control with face detection will notwork.Default: OffNote:• When "Off" is selected for "Super Dynamic(SD)", theinteractive control with face detection is deacti-vated.
