Panasonic TH-55AF1U Operating Instrctions

Also see for TH-42AF1U: Operating instructions Operating instructions

Contents

Panasonic TH-55AF1U Operating Instrctions Manual pdf 98 page image

English98● Touching the LAN Terminal with a statically chargedhand (body) may cause damage to the device due toits discharge.Do not touch the LAN Terminal or the metal part ofthe LAN cable.● For instructions on connection, consult your networkadministrator.Command controlNetwork function of the unit can control the unit in thesame way as serial control from a network.Supported commandsCommands used in the serial control are supported.(see page 27)Control Command via LANThe communication differs whether [LAN Control] -[Control Protocol] in OpenPort PLATFORM is set to[Protocol1] or [Protocol2].1. When [Control Protocol] is set to[Protocol1].Communicates using the display-specific protocol.■ When the command control administratorprivileges password has been set (Protectmode)Connection method1 Obtain the display’s IP address and the port number(Default is 1024), and request connection to thedisplay.The IP address and the port number can be obtainedfrom the following menus.• IP address:[STATUS] in OpenPort PLATFORM (see page 52)or [WIRELESS & NETWORKS] (see page 55)• Port number:[LAN Control] in OpenPort PLATFORM (see page54)2 The display responds.Response dataData part Space Mode SpaceRandomnumberpartLastterminalsymbol[PDPCONTROL](ASCIIcharacterstring)[ ]0x20[1]0x31[ ]0x20[zzzzzzzz](ASCIIcode hexnumber)(CR)0x0d10 bytes 1 byte 1 byte 1 byte 8 bytes 1 byteMode:1 = Protect mode3 Hash the following data with the MD5 algorithm, andgenerate a 32-byte hash value.[zzzzzzzzyyyyy]zzzzzzzz :8-byte random number obtained in step 2yyyyy :Command control administrator privileges user● Default user name and password are as follows:User name: admin1Password: panasonicCommand transmission methodTransmit in the following command formatTransmitted dataHeader Controlsymbol Data part ControlsymbolLastterminalsymbolHash value(see“Connectionmethod”)(STX)0x02Controlcommand(ASCIIcharacterstring)(ETX)0x03(CR)0x0d32 bytes 1 byte Undefined 1 byte 1 byteReceived dataControlsymbol Data part ControlsymbolLast terminalsymbol(STX)0x02Controlcommand(ASCIIcharacterstring)(ETX)0x03(CR)0x0d1 byte Undefined 1 byte 1 byteError responseError messageLastterminalsymbol“ERR1” : Undefined controlcommand(CR)0x0d“ERR2” : Out of parameterrange“ERR3” : Busy status orreception invalidperiod“ERR4” : Timeout or receptioninvalid period“ERR5” : Wrong data length“PDPCONTROLERRA”: Mismatching ofpassword4 bytes or 15 bytes 1 byte