English88Options AdjustmentsThis unit offers special functions conveniently usedaccording to the installation location and application.1 Press .[Setup] menu screen will be displayed.2 Select [OSD language] withand press for more than 3seconds.Following screen will be displayed.OptionsDisplay serial numberUSB data cloningSoftware licensesShippingOpenPort PLATFORM Shutdown3 Select [Options] with and press.[Options] menu screen will be displayed.1/300OptionsInput searchFailover/FailbackAudio input selectOnscreen displayInitial VOL levelInitial inputMaximum VOL levelInput lockButton lockController user levelPC auto settingOffOffOffOnOffOffOffOff2/30---OptionsOff-timer functionInitial startupStartup logoDisplay IDController ID functionSerial ID functionInformation timingOffOffEnableLast memoryOffSerial response(ID all) OffSerial daisy chain position3/3OptionsPower on screen delayClock displayPower on message(No activity power off)Power on message(Power management)POWER button lock OffOnOnOffOffNote● [POWER button lock] function is only for TH-55AF1U, TH-49AF1U and TH-42AF1U.4 Select the item to set with .For [Input search], [Failover/Failback], [Audio inputselect] and [Information timing], the submenu screenwill be displayed when you press .(see page 89, 92, 95)5 Set with .6 Press to exit from [Options]menu.Note● The remote control is necessary to display the[Options] menu. The control panel buttons on themain unit cannot be used to display the menu.● Press to return to the previous menu.● The serial number of this device is displayed when[Display serial number] is selected in step 3.● The software License is displayed when [Softwarelicenses] is selected in step 3.Input searchWhen a signal is not detected, another input with asignal is automatically selected.Note● The OpenPort PLATFORM input is not a target of the“no signal” detection. It is excluded from this function.Select the item with .Select the set point with .Input searchInput search1st search input2nd search inputCustom(None)(None)[Input search][Off]:When there is no signal, the input is not switchedautomatically.[All inputs]:Searches all inputs except [OpenPort PLATFORM],and switches to an input with a signal.Input search is executed in the following order.(Example) When the current input is [HDMI1][HDMI2] → [DVI-D] → [PC] → [COMPONENT]* →[VIDEO] → [USB] → [HDMI1]
