English84Multi display settings1 to 10 displays can be aligned in horizontal directionand vertical direction respectively, and those displaysare regarded as one group. The enlarged image isshown on the combined display.[Multi display settings]- submenu screenMulti display settingsMulti display settingHorizontal scaleBezel H adjustmentVertical scaleBezel V adjustmentLocationOff22A1Note● The settings are memorised separately for eachinput terminal.● When the multi display is set to [Off], adjust to thesame angle of view for [Position] (see page 68).Then, set the multi display to [On]. Again, makefine adjustment of the angle of view for [Position].● The [Position] menu can be adjusted in the multidisplay status.■ [Multi display setting][Off]:The display is not divided when enlarged.[On]:The display is divided when enlarged.When [On] is set, the display aspect is [16:9].■ [Horizontal scale]Set the horizontal scale in the multi display.1 to 10 (1 to 2 for USB input)■ [Vertical scale]Set the vertical scale in the multi display.1 to 10 (1 to 2 for USB input)Example:[Horizontal scale] [5] and [Vertical scale] [5] is set inthe multi display■ [Bezel H adjustment], [Bezel V adjustment]Adjust the area of image hidden in the jointhorizontally and vertically respectively.0 to 100Display exampleSetting value: 0Displays the entire image including the joint area.(Suitable when displaying character informationon PC.)Setting value: 100Does not display the image of the joint area.(Suitable when displaying motion pictures.)■ [Location]Assign the multi display position.Example:[Horizontal scale] [10], [Vertical scale] [10]A1 A2 ....................B1 B2.... ....A9B9....J1 J2 J9I1 I2 I9A10B10....I10J10Select from A1 to J10.● The displayed content for setting changesaccording to the settings for the [Horizontal scale]and [Vertical scale].● By setting [Multi display setting] to [Off], it ispossible to check the location on the screen whilethe setting menu is displayed.
