87English2 Press to switch functiongroup.Example: Memory load1.2.3.4.5.6.MEMORY 1MEMORY 2MEMORY 3MEMORY 4MEMORY 5----Memory loadWhen using OpenPort PLATFORM input, number 6will be [KEYBOARD].3 Press <1> - <6>.The function for the pressed button starts to operate.Example: When <2> is pressed.Memory loadLoad from “MEMORY 2”Ok CancelDisplay orientationSets the on-screen display orientation in the portraitsetting.[Landscape]:On-screen display angle is for horizontalinstallation.[Portrait]:The on-screen display rotates anticlockwise by 90degrees for easy view in the portrait setting.When the setting is changed, a confirmation message torestart OpenPort PLATFORM is displayed.Display orientationDo you want to reboot OpenPort PLATFORM?Yes NoSelect [Yes] with ◀ ▶ and press to restart.(Startup of OpenPort PLATFORM: see page 40)Power indicator18:00Note● In the portrait setting, the power indicator shall cometo the downside.● The display may be greyed out and setting cannotbe made in some conditions, such as when theOpenPort PLATFORM system is starting up.OSD positionSets the display position of the on-screen menu.Each time or is pressed, the display position of theon-screen menu changes.Display example:Left18:00Centre18:00Note● Display position settings vary depending on thesetting of [Display orientation].[Display orientation]: When it is set to[Landscape][Left] / [Centre] / [Right][Display orientation]: When it is set to [Portrait][Upper] / [Centre] / [Lower]Menu display durationSets the display duration time for the on-screen menu.[5 sec] to [180 sec]Menu transparencySets the transparency rate of the on-screen displaybackground.0 to 100
