113EnglishShipping conditionYou can reset the settings / the adjusted values of thefollowing menus to the factory settings:[Picture], [Sound], [Setup], [Position], [Options]At the same time, resets the settings and the data ofOpenPort PLATFORM to the factory settings and alsodeletes the applications you have installed.■ Remote control1 Press to display the [Setup]menu.2 Select [OSD language] withand press for more than 3seconds.The following screen will be displayed.OptionsDisplay serial numberShippingUSB data cloningSoftware licensesOpenPort PLATFORM Shutdown3 Select [Shipping] with and press.Note● The display may be greyed out in someconditions, such as when the OpenPortPLATFORM system is starting up. In this case,the operation is disabled.ShippingYES NO4 Select [YES] with and press.The message [Shipping ( Wait a moment )] will bedisplayed.5 After the message [Please turn offthe power] is displayed, turn thepower off pressing Off button>.● If the is locked,please disconnect the AC cord plug from the walloutlet.■ Unit1 Press times and display the [Setup] menu.2 Select [OSD language] with , andthen press and hold for more than 5 seconds.Note● The display may be greyed out in someconditions, such as when the OpenPortPLATFORM system is starting up. In this case,the operation is disabled.3 Select [YES] with <- (Unit)> or<+ (Unit)> and press .The message [Shipping ( Wait a moment )] will bedisplayed.4 After the message [Please turn offthe power] is displayed, turn thepower off pressing Off button>.● If the is locked,please disconnect the AC cord plug from the walloutlet.
