37English■Power ON messageThe following message may be displayed when turningthe unit power ON:No activity power off Precautions‘No activity power off’ is enabled.When [No activity power off] in the [Setup] menu is set to[Enable], a warning message is displayed every time thepower is turned ON. (see page 83)Note●[No activity power off] is not activated with OpenPortPLATFORM input. The message [ ‘No activity poweroff’ is enabled.] is not displayed, either.●The message [Last turn off due to ‘No activity poweroff’.] is also displayed when OpenPort PLATFORMinput is used at the time the display is turned on.“Power management” InformationLast turn off due to ‘Power management’.When “Power management” is functioned, aninformation message is displayed every time the poweris turned ON. (see page 81)These message displays can be set with the followingmenu:●[Options] menuPower on message(No activity power off)(see page 96)Power on message(Power management)(see page 96)Selecting the input signalSelect the signals input to the unit.Press or .INPUTMENUENTERUnitSwitches input every time the buttons are pressed.PC16:9[OpenPort PLATFORM] → [HDMI1] → [HDMI2] →[DVI-D] → [PC] → [COMPONENT]*→ [VIDEO] →[USB][OpenPort PLATFORM]:OpenPort PLATFORM system built into this unit.[HDMI1]:HDMI 1 terminal, HDMI input[HDMI2]:HDMI 2 terminal, HDMI input[DVI-D]:DVI-D IN terminal, DVI-D input[PC]:PC IN terminal, PC input[COMPONENT]*:COMPONENT/RGB IN terminal, Component input[VIDEO]:VIDEO terminal, composite video input[USB]:USB terminal, USB input*:[COMPONENT] may be displayed as [RGB]depending on the settings of [Component/RGB-inselect]. (see page 78)
