103EnglishUSB Media PlayerFunction descriptionThe USB media player displays still pictures andmotion pictures saved in a USB memory by insertingthe USB memory device into the USB terminal at thebottom of the display unit.Note● To use this function, set [USB media player] to[Enable] in [Setup] - [USB media player settings]. (seepage 85)Single Media PlayerFiles are played by a single unit.USB memoryNote● This unit does not support Multi Media Player.● Pictures in the USB memory cannot be displayedvia a daisy chain connection with the DVI-D IN/OUTterminal.Preparation■ Supported device● Commercially available USB memory devices aresupported. (Those with security functions are notsupported.)● USB memory devices other than those formatted inFAT16 or FAT32 cannot be used.● Up to 32 GB of USB memory in size are supported.● Only single partition configuration is supported.■ PreparationPrepare the following files in the USB memory for themedia player.● Play file● Scenario (as necessary)● File list (as necessary)■ Play fileThe unit’s Media Player supports the formats below.File name (Extension)Still image JPG, JPEG, JPEMoving image AVI, MKV, ASF, WMV, TS, MTS,MP4, 3GP, MOV, FLV, F4VCodecMoving imageCodec Maximum resolutionMPEG4VISUAL 480@30fpsMPEG4AVC 1080@30fps, High ProfileVC-1 Advanced 1080@30fpsVC-1 Simple & Main 1080@30fpsAudioCodec Sampling frequency(kHz)Bit rate(kbps)MP3 8/11.025/12/16/22.05/24/32/44.1/48 8-320AAC 8/11.025/12/16/22.05/24/32/44.1/48 1-1728WMA StandardWMA 9WMA 10 Pro8/11.025/12/16/22.05/24/32/44.1/48 1-1728Still imageCodec Maximum resolutionJPEG 4096×4096
