Panasonic TH-55AF1U Operating Instrctions

Also see for TH-42AF1U: Operating instructions Operating instructions

Contents

Panasonic TH-55AF1U Operating Instrctions Manual pdf 29 page image

29EnglishStick PCUSB cable (commercially available)HDMI extension cable (commercially available)Pin assignments and signal names for USB Terminal1 3 42Pin No. Signal name+5 V DCDATA -DATA +GND (Ground)Power of up to 5V/1A can be supplied to an externaldevice when the picture is displayed.● If the electric current exceeding the power supplyingcapability is applied, the output is blocked, and thefollowing message is displayed.[USB DC5V OUT overload. Please remove cable orequipment, then turn the display off/on.]In this case, remove the equipment and then turn thepower off/on using the remote control, etc.Note● If the direct connection to this unit is not possible dueto the size of a stick PC, etc. use a commercially soldextension cable.● Depending on the type of a USB memory device,it may come in contact with the periphery suchas a back cover, and cannot be attached. Use acommercially sold extension cable, or use a smalltype of a USB memory device connectable to thisunit.● Depending on the USB memory, the access lampmay remain blinking even when it is not beingaccessed. In this case, remove the device afterswitching to the input other than USB.Also, when data cloning is running, remove the deviceafter the screen to notify it is finished is displayed.(see page 107)Using microSD cardBy attaching a microSD card (commercially available)to the microSD card slot, use it as external storage forOpenPort PLATFORM system.(see page 47)■ microSD card usable on this unitThe following microSD card compliant with SD standardcan be used on this unit.(Such cards are referred to as microSD card in thismanual.)• microSD memory card (64 MB to 2 GB)• microSDHC memory card (4 GB to 32 GB)Only the Fat16-formatted microSD card and FAT32-formatted microSD card can be used on this unit.■ To insert or remove the microSD cardmicroSD cardcoverScrewmicroSD cardSurface1 Using a driver, loosen the screw of the microSDcard cover (anti-theft cover), and remove thecover.2 Make the surface of the microSD card face backside of the unit, and insert it securely until aclicking sound is heard.● For removal, push in the card until it clicks, and pullit out straight.3 Attach the cover to the original position.Note● Do not touch the connection terminal of themicroSD card.● Before attaching or removing the microSD cardcover, turn the unit off with

button>.● Be careful not to lose the removed cover. Be sureto attach it to the original position.● While the microSD card is operating, do not turnthis unit off, pull out the microSD card, or subjectthis unit to vibration, shock or static electricity.Saved data, etc. may be lost, or malfunction mayoccur.● When removing a microSD card, unmount the SDcard. (see page 57)● Do not insert non-standard microSD cards, orcards other than the microSD card.Malfunction may occur.