75English6 When you finished entering the profilename, select [Ok] with andpress .MY MEMORY1█01 2 3 4 5 6 7 8 9a b c d e f g h i jk l m n o p q r s tu v w x y z – _.a/A/@ OkCancelAll deleteDelete● To cancel saving the profile, select [Cancel].Loading profilesLoad profiles and apply the picture adjustment values tothe display as follows.1 In the [Picture] menu, select [Memoryload] with and press .Memory saveMemory loadMemory edit2 Select the profile to load with andpress .1. [ ]2. [ ]3. [ ]MEMORY1MEMORY2MEMORY3Memory loadLoading profiles using numeric buttons on theremote control.Each numeric button <1> - <5> is allocated forloading [MEMORY 1] to [MEMORY 5].[Function button settings] (see page 85)1 Press any of <1> - <5>.2 Select [Ok] with and press.Memory loadLoad from “MEMORY 2”Ok CancelWhen profile is being loaded, profile name isdisplayed.PC16:9Memory name: MEMORY 2Note● Loaded profiles are stored in memory accordingto the selected input terminal.Editing profilesDelete or rename profiles as follows.■ Deleting profiles1 In the [Picture] menu, select [Memoryedit] with and press .Memory saveMemory loadMemory edit2 Select [Memory delete] with andpress .Memory editMemory deleteMemory name change3 Select the profile to delete withand press .1. [ ]2. [ ]3. [ ]MEMORY1MEMORY2MEMORY3Memory deleteAll delete● To delete all profiles, select [All delete].4 Select [Ok] with and press.Memory deleteDelete the “MEMORY 1” dataOk Cancel■ Renaming profiles1 In the [Picture] menu, select [Memoryedit] with and press .Memory saveMemory loadMemory edit
