Panasonic TH-55AF1U Operating Instrctions

Also see for TH-42AF1U: Operating instructions Operating instructions

Contents

Panasonic TH-55AF1U Operating Instrctions Manual pdf 92 page image

English92● When the backup input, enabled by the operation ofthe Backup Input function, is being used for viewing.HDMI116:9Primary backup inputWhen the conditions for the Backup Input functionare met, the following screen is displayed.Backup mode OKNote● This menu will be greyed out and cannot be set underthe following conditions.• [Input lock] is set to [OpenPort PLATFORM]. (seepage 93)• [Input search] is set to the item other than [Off].(see page 88)● With the USB input, the unit determines video signalsare interrupted by judging the USB memory is notconnected to the USB terminal.Audio input selectSet up the sound when a video input is selected.1 Select the video input with .Set the audio input with .OpenPort PLATFORMHDMI1HDMI2DVI-DPCCOMPONENTVIDEO AUDIO2 INAUDIO2 INAUDIO1 INAUDIO1 INHDMI2HDMI1OpenPort PLATFORMAudio input select● The illustration above shows the factory settings.Video input Audio inputOpenPortPLATFORMOpenPort PLATFORM /AUDIO1 IN / AUDIO2 IN /No audioHDMI1 HDMI1 / AUDIO1 IN /AUDIO2 IN / No audioHDMI2 HDMI2 / AUDIO1 IN /AUDIO2 IN / No audioDVI-D / PC /COMPONENT* /VIDEOAUDIO1 IN / AUDIO2 IN /No audioNo audio: No audio input (Mute)*: [COMPONENT] may be displayed as [RGB]depending on the settings of [Component/RGB-inselect]. (see page 78)When the setting for the audio input has beenchanged from the factory settings, the audio input isdisplayed as below.HDMI116:9AUDIO1 INOnscreen displaySet to display / hide the following Onscreen display.● Power on display● Input signal switch display● No signal display● No external media display (at USB input)● MUTE display after displaying the menu screen● Off timer remaining time display when 3 minutesremaining[On]:Displays the Onscreen display.[Off]:Hides the Onscreen display.Initial inputAdjusts the input signal when the unit is turned on.[Off] / [OpenPort PLATFORM] / [HDMI1] / [HDMI2] /[DVI-D] / [PC] / [COMPONENT]* / [VIDEO] / [USB]*: [COMPONENT] may be displayed as [RGB]depending on the settings of [Component/RGB-inselect]. (see page 78)NoteThis menu is available only when [Input lock] is [Off].(see page 93)Initial VOL levelAdjusts the sound volume level when the unit is turnedon.[Off]:It will be the sound volume level which had beenset before the power of the unit was turned off.[On]:Sets your preferred volume.● Outputs with the set volume when [Initial VOL level] in[On] state is selected on the menu.■ To adjust sound volume levelPress .Note● When [Maximum VOL level] is [On], the volumecannot be set to the level higher than the level set for[Maximum VOL level].