Panasonic TH-55AF1U Operating Instrctions

Also see for TH-42AF1U: Operating instructions Operating instructions

Contents

Panasonic TH-55AF1U Operating Instrctions Manual pdf 54 page image

54[LAN Control] applicationThis unit unique application. Select the [LAN Control] button icon on the [TOOLS] screen to display the [LAN Control]screen.Sets [ON]/[OFF] of [Command Control], [Control Protocol], [Port number], [Display name], [User name] and [Password]via LAN of this unit.■ [Command Control]Set this to [ON] when performing the command control of this unit (see page 98) via network.[ON]: Enables the command control.[OFF]: Disables the command control.■ [Control Protocol]Select the protocol for the LAN control.[Protocol1]: Controls with the sequence of the Panasonic display.[Protocol2]: Controls with the sequence compatible with the Panasonic projector.Note● PJLink can be operated regardless of the [Control Protocol] setting.● When performing the command control with TCP/IP, select [Protocol1].● When operating the “Early Warning Software” or “Multi Monitoring & Control Software”, select [Protocol2].■ [Port number]Set the port number to use for the command control.Setting range: 1024 (Default) to 65535 (excluding 4352)Note● When using PJLink, the port setting is not necessary.■ [Display name]Set the name of this unit displayed on the network.■ [User name]Set the user name added to the command.(Default: admin1)■ [Password]Set the password used for the command control and PJLink security authentication.(Default: panasonic)