English78Setup menu1 Press to display the [Setup]menu.1/2SetupSignalScreensaverInput labelPower management settingsWobblingNo activity power offOSD languageOffDisableEnglish(UK)OpenPort PLATFORM standby Off2/220SetupMulti display settingsLandscapeUSB media player settingsFunction button settingsDisplay orientationOSD positionMenu display durationMenu transparencyRight60 secSet up timer2 Select the item to set with .● Menu that cannot be adjusted is greyed out.Adjustable menu changes depending on signal,input and menu setting.3 Set with .4 Press to exit from adjustmode.■ To return to the previous screenPress .SignalExamples of [Signal] submenu screenWhen OpenPort PLATFORM is selectedSignalNoise reductionMPEG noise reductionAutoOffDynamic backlight control OffWhen HDMI / DVI is selected60.00 Hz74.18 MHz1125(1080)/60i33.72 kHzSignalCinema realityYUV/RGB-in selectNoise reductionSignal rangeMPEG noise reductionDynamic backlight controlV-freq.H-freq.Dot clock freq.Signal formatOffYUVAutoFull(0-255)OffOffWhen PC is selected60.00 Hz74.18 MHz1125(1080)/60i33.72 kHzSignalComponent/RGB-in selectSyncCinema realityXGA modeV-freq.H-freq.Dot clock freq.Input levelSignal formatRGBAutoOffAutoDynamic backlight control OffMPEG noise reductionNoise reductionOffAutoWhen COMPONENT / RGB is selected60.00 Hz74.18 MHz1125(1080)/60i33.72 kHzSignalComponent/RGB-in selectCinema realityMPEG noise reductionXGA modeNoise reductionInput levelH-freq.V-freq.Dot clock freq.Signal formatComponentOffOffAutoAutoDynamic backlight control OffWhen VIDEO is selected59.94 Hz-- MHzNTSC15.73 kHzSignal3D Y/C filterColour systemMPEG noise reductionCinema realityInput levelNoise reductionH-freq.OffAutoOffOffAutoV-freq.Dot clock freq.Signal formatDynamic backlight control OffWhen USB is selectedSignalNoise reductionMPEG noise reductionAutoOffNote● [Signal] setup menu displays a different settingcondition for each input signal.● Menu that cannot be adjusted is greyed out.■ [Component/RGB-in select]This menu is displayed at PC IN and COMPONENT/RGB IN inputs.Select to match the signals from the sourceconnected to each terminal.
