Panasonic TH-55AF1U Operating Instrctions

Also see for TH-42AF1U: Operating instructions Operating instructions

Contents

Panasonic TH-55AF1U Operating Instrctions Manual pdf 93 page image

93EnglishMaximum VOL levelAdjusts the maximum volume.[Off]:The sound volume level can be set up to 100(maximum).[On]:The sound volume level will not exceed the setpoint.● Outputs with the set volume when [Maximum VOLlevel] in [On] state is selected on the menu.■ To adjust sound volume levelPress .Note● When the [Maximum VOL level] is switched from[Off] to [On], if the [Maximum VOL level] is set lowerthan the [Initial VOL level], the [Initial VOL level]automatically becomes the same as the [MaximumVOL level].Input lockLocks the input switch operation.[Off] / [OpenPort PLATFORM] / [HDMI1] / [HDMI2] /[DVI-D] / [PC] / [COMPONENT]* / [VIDEO] / [USB]*: [COMPONENT] may be displayed as [RGB]depending on the settings of [Component/RGB-inselect]. (see page 78)Note● Input switch can be used when this is set to [Off].Button lockLimits operation of the buttons on the unit.[Off]:All the buttons on main unit can be used.[On]:All button operations except for the

On / Off button> are disabled.[MENU & ENTER]:Locks and buttons.■ To set [Button lock]Set with the buttons on the unit.[Off]:Press <+ (Unit)> for 4 times.Press for 4 times.Press <- (Unit)> for 4 times.Press .[On]:Press <- (Unit)> for 4 times.Press for 4 times.Press <+ (Unit)> for 4 times.Press .[MENU & ENTER]:Press for 4 times.Press <+ (Unit)> for 4 times.Press for 4 times.Press .Controller user levelLimits operation of the buttons on the remote control.[Off]:You can use all of the buttons on the remote control.[User1]:You can only use ,, , , and buttons on the remote control.[User2]:You can only use onthe remote control.[User3]:Locks all the buttons on the remote control.PC auto settingSets the operational mode of the automatic positionadjustment in the [Position] menu.[Off]:Automatic position adjustment starts when SETUP> is pressed on the remote control orautomatic position adjustment is executed from the[Position] menu.[On]:Other than remote control or menu operation,automatic position adjustment starts:• When the display power is turned ON.• When the input signal is switched.