56+ buttonAdds the access point.If the access point you wish to connect cannot be found on the list, set the following with manual input.Selecting + button will display the setting menu of the network to add.[Network SSID]: Enter the SSID.[Security]: Select the encryption method from the following.[None], [WEP], [WPA/WPA2 PSK], [802.1x EAP][Show advanced options]: Displays [Proxy] and [IP settings] when a check mark is added to the check box.Menu buttonSelect the menu button to display the following items.[Scan]: Searches for access points in your area again, and displays them on the list.[WPS Pin Entry]: Use this when connecting to the access point device compatible with WPS.A PIN code is displayed in the message displayed when this is selected. Input the PINcode into the access point device within 2 minutes.For operation of the access point device, read the operating instructions supplied withthe device.[Wi-Fi Direct]: Directly communicates between Wi-Fi devices without the access point device.Selecting this will display usable devices on the list. Select the device to connect.[Advanced]: Displays the option settings related to Wi-Fi communication.Note● When [IP settings] is set to [DHCP], the IP address, etc. are not displayed. Confirm the current IP address, etc. in[STATUS]. Also, the DNS set on this screen will be invalid.● When using a DHCP server, confirm that the DHCP server has started up.● For setting details, consult the network administrator.● The wired LAN and wireless LAN cannot be used in the same segment.
