1.6 Memory Dialing Features62 Feature Guide[Example]When storing the number "9-123-456-7890", to conceal the telephone number "123-456-7890",Notes• It is possible to store a Memory Dialing feature number at the beginning of Memory Dialingnumbers.• It is possible to store several feature numbers in one Memory Dialing location.Conditions• CO Line Access by Memory DialingA specific CO Line Access number can be stored along with the telephone number in Memory Dialing.However, if Memory Dialing is done after selecting a CO line, the stored CO Line Access number isignored and the telephone number is sent using the selected CO line.1.6.1.2 One-touch DialingDescriptionA proprietary telephone (PT) user can make a call or access a feature with a one-touch operation. This ispossible by storing the number, such as an extension number, telephone number, or feature number, in aOne-touch Dialing button.Conditions• One-touch Dialing ButtonAny flexible button can be customized as a One-touch Dialing button.• Full One-touch DialingThere is no need to go off-hook before pressing a One-touch Dialing button.FLASH/RECALL(Hooking)*F Store a flash/recall signal (EFA mode) by pressing the FLASH/RECALL button at the beginning of the number. (→ 1.10.6External Feature Access (EFA))INTERCOM(Secret)*[/] Conceal all or part of the number by pressing the INTERCOMbutton at the beginning and at the end of the number to beconcealed. It is programmable whether the concealed part willbe shown on the SMDR (→ 1.21.1 Station Message DetailRecording (SMDR)).TRANSFER(Transfer)*T Store a transfer command by pressing the TRANSFER buttonat the beginning of the number (used only for One-touchDialing). (→ 1.11.1 Call Transfer)[Example] Storing "T + 305"= Transferring a call to extension305.* Available only when in the system/personal programming modeInput Displayed whileEntering DescriptionEnter .INTERCOM9 1 2 3 4 5 6 7 8 9 0 INTERCOM
