Panasonic KX-TAW848 Features Manual

Also see for KX- TAW848: User guide User guide Installation manual User manual User manual

Contents

Panasonic KX-TAW848 Features Manual Manual pdf 544 page image

4.14 ARS [8]544 Feature GuideFeature Guide References1.9.1 Automatic Route Selection (ARS)Authorization Code for TRGSpecifies an Authorization code for each CO line group. The Authorization codes can be added to the user-dialed number by specifying "G" command in Modify Command on the Carrier tab.Authorization Code for Trunk Group—TRG 01–TRG 64Specifies the Authorization code of each carrier for each CO line group.DefaultNot stored.Value RangeMax. 10 digits (consisting of 0–9, *, and #)Programming ReferencesNoneFeature Guide References1.9.1 Automatic Route Selection (ARS)4.14.6 Leading Number Exception [8-6]Specifies telephone numbers that will not be connected using the ARS feature. When the user-dialednumber includes a leading number exception, the PBX sends the number to a CO line by the Idle LineAccess method if ARS Mode in System Setting [8-1] is "on". A maximum of 200 different leading numberexceptions can be programmed.Leading Number ExceptionSpecifies the leading number exception.DefaultNot stored.Value RangeMax. 16 digits (consisting of 0–9, *, #, and X)Note"X" can be used as a wild card character which substitutes any digit in its position.Programming ReferencesNone