4.8 System [2]362 Feature GuideFeature Guide References1.1.3.2 Ring Tone Pattern Selection4.8.18 Ring Tone Patterns—Call from Doorphone [2-8-2]Different ring tone patterns can be selected for incoming doorphone calls depending on the doorphone portsthe calls come through. A maximum of 8 Ring Tone Pattern Tables can be programmed, and any patterntable can be selected for use by an extension.Ring Tone Pattern Table 1–8Specifies the ring tone pattern for incoming doorphone calls.DefaultTripleValue RangeSingle, Double, Triple, S-DoubleProgramming References4.10.1 Wired Extension—Extension Settings [4-1-1]—Main—Ring Pattern Table4.10.7 Portable Station—Extension Settings [4-2-1]—Main—Ring Pattern Table4.11.1 Doorphone [5-1]Feature Guide References1.1.3.2 Ring Tone Pattern Selection4.8.19 Ring Tone Patterns—Call from Others [2-8-3]Different ring tone patterns can be selected for incoming intercom calls and ringing triggered by certain PBXfeatures (Timed Reminder, Call Back, and Live Call Screening). A maximum of 8 Ring Tone Pattern Tablescan be programmed, and any pattern table can be selected for use by an extension.Extension—Ring Tone Pattern Table 1–8Specifies the ring tone pattern for incoming intercom calls.DefaultDoubleValue RangeSingle, Double, TripleProgramming References4.10.1 Wired Extension—Extension Settings [4-1-1]—Main—Ring Pattern Table4.10.7 Portable Station—Extension Settings [4-2-1]—Main—Ring Pattern Table
