Panasonic KX-TAW848 Features Manual

Also see for KX- TAW848: User guide User guide Installation manual User manual User manual

Contents

Panasonic KX-TAW848 Features Manual Manual pdf 531 page image

4.12 Feature [6]Feature Guide 531Operator (Extension Number)Specifies the extension number or floating extension number of an incoming call distribution group to bedesignated as the tenant operator. When this parameter is left unspecified, a PBX operator serves as thetenant operator.DefaultNot stored.Value RangeMax. 4 digits (consisting of 0–9)Programming References4.8.3 PBX Operator [2-2]Feature Guide References2.2.3 Tenant Service2.2.5 Operator FeaturesARS ModeSpecifies the ARS mode used when making a CO line call.DefaultSame as System SettingValue RangeOff: ARS is disabled.On for Local Access Operation: ARS operates when an extension user makes a call using any Idle LineAccess method.On for Any CO Access Operation: ARS operates when an extension user makes a call using any CO LineAccess method.Same as System Setting: The setting specified in ARS Mode in System Setting [8-1] is applied.Programming References4.14.1 System Setting [8-1]Feature Guide References1.9.1 Automatic Route Selection (ARS)2.2.3 Tenant ServiceSystem Speed DialIndicates the system speed dial table in use by the tenant (reference only).DefaultBasic Memory