4.7 Configuration [1]284 Feature GuideFeature Guide ReferencesNoneDeleteAssigns the card type to be deleted from the slot.DefaultNot applicable.Value RangeNot applicable.Programming References4.7.1 Slot [1-1]Feature Guide ReferencesNone4.7.7 Portable Station [1-2]Various portable station (PS) settings can be programmed. A maximum of 28 PS can be registered.PS Registration and De-registrationA PS must be registered to the PBX by programming both the PBX and PS before it can be used.Programming instructions of the PBX are given below; programming instructions of the PS are found in theInstallation Manual.If desired, it is possible to de-register the PS later on.RegistrationFollow the steps below to register the PS.1. Specify the extension number of the PS, and then click Apply.2. Select the PS by clicking the Select cell and set it to ON.More than one PS can be selected at a time (only the unregistered PS with an extension numbercan be selected).3. Click Registration.A dialog box will appear when the registration starts to execute.4. While the registration is executing, program the PS referring to "2.7.7 Connecting a Cell Station tothe PBX" of the Installation Manual.5. Click Confirm.• If the registration is still in the process, the dialog box will show "Waiting: PS Registration".Click Close.• If the registration is successful, the dialog box will show "Registration Succeed".If there are more PSs to be registered, click Continue to resume or Quit to terminate theregistration. If not, click Close.
