4.15 CO & Incoming Call [9]Feature Guide 551Feature Guide References1.1.1.2 Direct In Line (DIL)1.1.1.3 Calling Line Identification (CLI) Distribution4.15.3 Miscellaneous [9-3]It is possible to activate the Intercept Routing feature when the destination of an incoming CO line call isunavailable, or when there is no destination for the call.Intercept when the destination is BusyEnables the Intercept Routing—Busy feature to activate when the original destination is busy.DefaultDisable (Busy Tone)Value RangeDisable (Busy Tone): Sends busy tone to the caller (However, a call through LCOT card will ring at theoriginal destination while the caller hears a ringback tone.)Enable: Redirects the call to the intercept destinationProgramming ReferencesNoneFeature Guide References1.1.1.4 Intercept RoutingIntercept when the destination sets DNDEnables the Intercept Routing—DND feature to activate when the original destination is in DND mode.DefaultEnableValue RangeDisable (Busy Tone): Sends busy tone to the caller (However, a call through LCOT card will ring at theoriginal destination while the caller hears a ringback tone.)Enable: Redirects the call to the intercept destinationProgramming ReferencesNoneFeature Guide References1.1.1.4 Intercept Routing
