4.5 UtilityFeature Guide 251To transfer files to the SD memory card1. From the Utility menu, select File Transfer PC to PBX (SD Card).The dialog box will be displayed.2. Select the file to upload.A window showing the upload progress will be displayed.During transfer, the PBX automatically renames files transferred to the SD memory card according tothe header information.A message will be displayed when the transfer is complete.3. Click OK.4.5.3 Utility—File Transfer PBX (SD Card) to PCCopies system data files from the SD memory card installed in the PBX to the connected PC.This option is only available at Installer level.The files that can be downloaded from the SD memory card are as follows:Downloading the DSSYS system data file allows you to make a backup of the configuration of the PBX.The error data files are snapshots of the configuration of the PBX taken automatically when a major errorcauses a system reset. They can be analyzed by your dealer to identify the source of a problem. If there isonly one error data file, its name will be $SYSERR. If there is more than one file, the files will be numberedin chronological order, up to a maximum of 9 files.To transfer files to the PC1. From the Utility menu, select File Transfer PBX (SD Card) to PC.2. Select the file to download from the list of files on the SD memory card.Initial DataName on SD Memory Card Corresponding CardDSINI MPRDSIHLC HLC4DSIPLC PLC4/PLC8DSISLCLC SLC4/SLC8DSILCOT LCOT2/LCOT4DSIEIO DPH4File Type File NameSystem Data DSSYSError Data $SYSERR$SYSERR1–$SYSERR9Feature Restriction DSKEYSD
