4.10 Extension [4]436 Feature GuideExtension NumberSpecifies the extension number of the extension.To change the extension number of a wired extension, follow the steps below:1. Type the new extension number, then click Apply.2. Set the status of the extension port to "OUS", then "INS".When changing the extension number, make sure that the extension port is not in use. If the extensionnumber is changed while the port is in use, the new extension number will not come into effect.DefaultStarting at 101 (For port 01 of the first extension card that is installed. Extension numbers are preset forsubsequent extensions by adding one to the previous extension number.)Value RangeMax. 4 digits (consisting of 0–9)Programming References4.7.12 Extension Port [1-5] Port CommandFeature Guide ReferencesNoneExtension NameSpecifies the name of the extension. As for the available characters, refer to the character code tabledescribed in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console.DefaultNot stored.Value RangeMax. 20 charactersFeature Guide ReferencesNoneCall Pickup DenyEnables the prevention of calls being picked up by other extensions.DefaultDisableValue RangeDisable: Allows other extension users to pick up the calls to your extensionEnable: Denies other extension users to pick up the calls to your extension
