Panasonic KX-TAW848 Features Manual

Also see for KX- TAW848: User guide User guide Installation manual User manual User manual

Contents

Panasonic KX-TAW848 Features Manual Manual pdf 242 page image

4.3 Connect242 Feature Guide4.3 Connect4.3.1 Connect—RS-232CConnects to the PBX in Interactive mode through the serial RS-232C interface of the PBX.The settings are as follows:To connect using RS-232C1. From the Connect menu, select RS-232C.2. Enter the settings as required.3. Click OK.4.3.2 Connect—USBConnects to the PBX in Interactive mode through the USB port on the PBX, or a USB port (USB Module)attached to a DPT.To connect using USB1. From the Connect menu, select USB.2. Enter the password corresponding to the Programmer Code used to log on to the MaintenanceConsole.3. Click OK.Setting Values DescriptionPort COM1–COMx Specify the number of the COM portassigned to the PC's RS-232C interface.Only available COM ports will bedisplayed.NL Code CR, CR+LF Specify the code to be sent to signify theend of a line. Choose CR+LF.Baud Rate 2400bps, 4800bps,9600bps, 19200bps,38400bps, 57600bps,115200bpsSpecify the speed of data transmission.Flow Control None, Hardware Specify whether the rate of data transferis managed by hardware or not. ChooseHardware.Password – Enter the password corresponding to theProgrammer Code used to log on to theMaintenance Console.