4.5 UtilityFeature Guide 255To view CS information1. From the Utility menu, select CS Information.2. From the Target CSI/F Slot No drop-down list, select the target slot.• To display information on a single card, select the slot number and name of that card.• To display information on all matching cards, select "ALL".3. From the Interval Timer drop-down list, select the number of seconds between each automatic screenrefresh.4. Click Start to begin monitoring.Monitoring will be performed and the screen will refresh according to the interval specified.To refresh the screen manually at any time, click Refresh.5. Click Stop to end monitoring.4.5.9 Utility—PS InformationDisplays Portable Station (PS) registration information, including the associated Cell Station (CS).This option is only available at Installer level.The displayed items are as follows:Status Service status of the attached CS: INS, OUS, or FAULT.If the status is FAULT, subsequent data items for that port will be leftblank.Version Version number of the program file stored in the CSRevision Revision number of the program file stored in the CSCSID 12-digit ID number of the CSPath Number of the wireless extension currently using each path. In thecase of a group, several extensions may be using the same floatingextension number.When an extension number is not registered, the display shows"OFF". PSs can use up to 2 paths.Group Call Number of PSs registered to the attached CS that are members ofa PS Ring Group.Item DescriptionPS No. PS location number.Only registered PSs will be displayed.Extension Number Extension number of the PS.Location—Slot Slot number of the CS that the PS is registered with.Location—Port Port number of the CS that the PS is registered with.Item Description
