2.3 System Data Control186 Feature Guide• The PBX will allow 16 simultaneous personal programming sessions, or one system or managerprogramming session and 15 personal programming sessions.• System Programming Password LevelTo access system programming, a valid password must be entered. For more details, see Section 3.1Introduction.• Personal Programming Data ResetA PT user can return settings made through personal programming (Preferred Line Assignment, LiveCall Screening Mode, etc.) to their default settings all at once.Feature Guide References2.2.6 Manager Features3.3 PT ProgrammingUser Manual References3.1 Personal Programming3.2 Manager Programming3.3 System Programming2.3.3 Quick SetupDescriptionBasic PBX parameters can be programmed the first time the PBX is accessed with a PC using the KX-TAW848 Maintenance Console software.When the PBX is accessed with the Installer Level Programmer Code and default password (→ 2.3.1 PCProgramming), for the first time (i.e., accessed after the PBX's settings have been initialized or when thePBX's settings are still set to their default values), Quick Setup will launch automatically. From here thefollowing basic parameters can be programmed as desired:Item Parameter DescriptionDate & Time Set Year/Month/Date/Hour/MinuteThe date and time set on the PC can be used by default.SystemPassword forInstaller4–10 characters Enter the system password for installer (→ 3.1 Introduction).Operator &ManagerExtensionNumberAssign a PBX operator. (→ 2.2.5 Operator Features) Thisextension will be the operator for all time modes, and isautomatically assigned manager status to perform manageroperations. (→ 2.2.6 Manager Features)
