Thickness Sheets 0.07–0.8 mm (0.0028–0.031 in)Paper Size Roll width 24-in. Roll (609.6mm), ISO A1/A2 Roll (594.0mm), JIS B2/B3 Roll(515.0mm), 17-in. Roll (431.8mm), ISO A2/A3 Roll (420.0mm), 16-in. Roll (406.4mm), 14-in. Roll (355.6mm), 300mm Roll (300.0mm),ISO A3/A4 Roll (297.0mm), JIS B4 Roll (257.0mm), and 10-in. Roll(254.0mm)Sheets ISO A1, ISO A2+, ISO A2, ISO A3+, ISO A3, ISO A4, ISO B2,ISO B3, ISO B4, JIS B2, JIS B3, JIS B4, 22"x34"(ANSI D),17"x22"(ANSI C), 13"x19" (Super B), 11"x17" (Ledger), Legal(8.5"x14"), Letter (8.5"x11"), 24"x36" (ARCH D), 18"x24"(ARCH C), 12"x18" (ARCH B), 9"x12" (ARCH A), DIN C2, DINC3, DIN C4, 20"x24", 18"x22", 14"x17", 12"x16", 10"x12",10"x15", US Photo 16"x20", Poster 20"x30", 13"x22", and Poster300x900mmPrint area Normal size Printable area• Rolls3 mm (0.12 in) from each side• Sheets3 mm (0.12 in) from the top, 23 mm (0.91 in) from the bottom, and3mm (0.12 in) from the left and right sidesFor information on the recommended print area, see "Print Area."→P.683Borderless printing(*2 →P.682 )Printable area (rolls)0 mm from the top, 0 from the bottom, and 0 mm from the left andright sidesSupported width for borderless printing 24-in. Roll (609.6mm), ISO A1/A2 Roll (594.0mm), JIS B2/B3 Roll(515.0mm), 17-in. Roll (431.8mm), ISO A2/A3 Roll (420.0mm), 14-in. Roll (355.6mm), 300mm Roll (300.0mm), ISO A3/A4 Roll(297.0mm), JIS B4 Roll (257.0mm), and 10-in. Roll (254.0mm)*1: When supplying paper, use a roll approximately 1,000 mm (1,093.6 yd) or longer.*2: Printing may not be possible in some cases, depending on the type and size of paper.Output stacker capacity, in sheetsRegular position 1Extended position (*1 →P.682 ) 20*1: For information on types of paper you can use with the stacker in Extended position, refer to the Paper Reference Guide.(See "Types of Paper.") →P.562OptionsRoll Holder Set RH2-26Stand ST-26Printer Parts > Printer Specifications >Specifications iPF6508682
