Setting Item Description, InstructionsSystemSetup Nozzle Check In Frequency, specify the timing for automaticchecks of nozzle clogging. Choose Standard to havethe printer adjust the timing for checks based on thefrequency of nozzle use. Choose 1 page to checkonce per page.Select Warning > On to display warnings if the noz-zles clog during printing.Use RemoteUI Choosing Off prohibits access from RemoteUI. Set-tings can only be configured from the control panel.Reset PaprSetngs Restores settings that you have changed with MediaConfiguration Tool to the default values.Show Job Log Selecting Off prevents display of the log in JobMenu > Job Log. Additionally, the log is not printedif you choose Job Menu > Print Job Log. Note thatbecause job logs are not collected, the Status Monitoraccounting functions will not work correctly.Prep.MovePrinter Select this option when transferring the printer to an-other location. Follow the instructions displayed tocomplete the required procedure. (See "Preparing toTransfer the Printer.") →P.749Not displayed during a warning message that the re-maining Maintenance Cartridge capacity is low.Ad-min.MenuChange Password By setting a password, you can restrict menu displayand configuration as follows. You can input between0 and 9999999.• Viewing and configuration by administratorsonlyIPv4 SettingsChange PasswordInit.Admin.Pswd• Viewing and configuration byadministrators, and only viewing by otherusersInterface Setup settings (except IPv4 Settings )Date & TimeDate FormatTime ZoneUse RemoteUIReset PaprSetngsInit.Admin.Pswd Choose OK to restore the Admin. Menu password tothe default values.PrinterInfoPaper Info Indicates the current paper size, type, and relatedprinter settings.Ink Info Indicates ink levels and maintenance cartridge ca-pacity.Head Info Indicates the model name, serial number, number ofdays used, and dot count of the current printhead.Printer Parts > Control Panel >Menu Settings iPF6508666
