Caution• Do not force the Roll Holder into the printer with the right and left ends reversed. This may damagethe printer and Roll Holder.• Do not release the flanges until the holder is loaded in the Roll Holder Slot.• Be careful not to pinch your fingers between the Roll Loading Slots (b) and the Roll Holder shaft (c)when loading rolls.6. Advance the roll to insert the leading edge in the Paper Feed Slot (a) until you hear a tone.Important• Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect theprinting quality. We recommend wearing clean cloth gloves when handling rolls to protect the print-ing surface.• If the paper is wrinkled or warped, straighten it out before loading it.• Load paper straight so it is not fed askew.7. Once paper feeding starts, you will need to do the following, based on the ManageRemainRoll setting and the bar-code printed on rolls. (See "Keeping Track of the Amount of Roll Paper Left.") →P.583Manag-eRemain-RollBarcodes Printer Operation After the Paper is FedOff Printed A menu for selection of the type of paper is automatically shown on the Display Screen.Press ▲ or ▼ to select the type of paper, and then press the OK button.Not prin-tedOn Printed The type and amount of paper left is automatically detected based on the barcode printedon the roll.There is no need to specify the type and length of the paper.Handling Paper > Handling rolls >Loading Rolls in the Printer iPF6506574
