2. In Enlarged Copy Settings, click Add or Edit and either create or modify the hot folder.For instructions on registering and modifying hot folders, refer to the help file for Color imageRUNNER Enlarge-ment Copy.Completing the scanning settings on the Color imageRUNNER.Configure the Color imageRUNNER to send scanned originals to the hot folder. It is easy to send scanned originals to thehot folder if you assign the scanning settings and destination to a Favorites button on the Color imageRUNNER.For instructions on assigning scanning and sending settings to the Favorites button, refer to the Color imageRUNNER man-ual.Scanning the original and print an enlargementFollow the steps below to scan an original on the Color imageRUNNER for enlarged printing on the printer. For detailedinstructions, refer to the Color imageRUNNER manual.1. Load the original on the platen glass or document feeder of the Color imageRUNNER.2. Press Send to display the screen for transmission.3. Press Favorites, and then press the Favorites button assigned to the hot folder.4. Press Start on the control panel. If you scan originals on the platen glass, after scanning all originals, press Done onthe touch-panel display.Scanned originals are sent to the hot folder and automatically enlarged and printed following the conditions youspecified for the folder.Mac OS X Software > Color imageRUNNER Enlargement Copy >iPF650 Printing Enlargements of Scanned Originals from a Color imageRUNNER5535