Chapter 33-163F-3-10553.7.5.8 Removing the Right Frame 0011-66081) Remove the 5 screws [1], and detach the right frame [2].F-3-10563.7.5.9 Removing the Left Frame 0007-88931) Remove the 4 screws [1], and detach the left frame [2].F-3-10573.7.5.10 Removing the Cassette Feeder 0007-88941) Lift the machine, and detach the cassette feeder [1].F-3-10583.7.5.11 Removing the Shield Plate 0011-66241) Free the flat cable [1] from the connector.2) Remove the 6 screws [2], and detach the shielding plate [3].F-3-10593.7.5.12 Removing the Inside Cover 0007-88981) Remove the 2 claws [1], and detach the inside cover [2].F-3-10603.7.5.13 Removing the Registration Clutch 0007-88991) Disconnect the connector [1], and open the harness band [2].2) Remove the E-ring [3], and detach the registration clutch [4].F-3-1061The connector on the registration clutch side is designed to prevent discon-nection. If you have to detach the registration clutch, be sure to disconnectthe connector (J113) on the DC controller PCB side.[1][2][1][1][2][1][1][2][1][2] [2][3] [1][1][2][1][2] [3][4]
