Canon MF8100 Series Service Manual

Contents

Canon MF8100 Series Service Manual Manual pdf 241 page image

Chapter 33-151F-3-9783.6.10 Main Motor3.6.10.1 Removing the Rear Cover 0007-79741) Disconnect the cable [1] of the power supply assembly.2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.F-3-9793) Open the reader assembly [4], and lift to free the 2 claws [5].F-3-9804) Close the reader assembly; then, detach the rear cover[1].F-3-9813.6.10.2 Removing the Reader Assembly 0007-84871) Open the reader assembly, and remove the left and right E-rings [1]; then,pull out the pin [2].F-3-982When closing the reader assembly, be sure to push in the arm [1] first.F-3-9832) Open the left and right claws in the direction of the arrows, and detach thehinge cover [1].3) Free the 2 harness bands [1], and disconnect the 2 cables [2] connected tothe reader assembly.F-3-9844) Open the harness band [1], and disconnect the 2 cables connected to thereader assembly.[1][2][2][3][1][3][4][5][2][3][1][3][2][1][2][1][1][2][1][3]