Canon MF8100 Series Service Manual

Contents

Canon MF8100 Series Service Manual Manual pdf 191 page image

Chapter 33-101F-3-6603.5.6.8 Removing the Right Frame 0011-65991) Remove the 5 screws [1], and detach the right frame [2].F-3-6613.5.6.9 Removing the Shield Plate 0011-66201) Free the flat cable [1] from the connector.2) Remove the 6 screws [2], and detach the shielding plate [3].F-3-6623.5.6.10 Removing the Rotary Drive Assembly 0007-88721) Disconnect the 4 connectors [1], and remove the 2 screws [2].F-3-6632) Disconnect the connector [1], and remove the 3 screws [2]; then, detachthe rotary drive assembly [3].F-3-664Be sure to tighten the self-tapping screw used to secure the rotary drive as-sembly only at the end of the work.3.5.6.11 Removing the Toner Cartridge Motor 0007-88731) Disconnect the connector [1], and remove the screw [2]; then, detach thetoner cartridge motor [3] from the rotary drive assembly.F-3-6653.5.6.12 Removing the Developing Rotary Motor 0007-88741) Remove the 2 screws [1], and detach the toner cartridge motor [2] fromthe rotary drive assembly.[1][2][1][1][2][2] [2][3] [1][2][1][1][1][1] [2][2] [3][2][1][2][3]