Canon MF8100 Series Service Manual

Contents

Canon MF8100 Series Service Manual Manual pdf 196 page image

Chapter 33-106F-3-6913.5.8 ITB Home Position Detection PCB3.5.8.1 Removing the Rear Cover 0007-85521) Disconnect the cable [1] of the power supply assembly.2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.F-3-6923) Open the reader assembly [4], and lift to free the 2 claws [5].F-3-6934) Close the reader assembly; then, detach the rear cover[1].F-3-6943.5.8.2 Removing the Reader Assembly 0007-85701) Open the reader assembly, and remove the left and right E-rings [1]; then,pull out the pin [2].F-3-695When closing the reader assembly, be sure to push in the arm [1] first.F-3-6962) Open the left and right claws in the direction of the arrows, and detach thehinge cover [1].3) Free the 2 harness bands [1], and disconnect the 2 cables [2] connected tothe reader assembly.F-3-6974) Open the harness band [1], and disconnect the 2 cables connected to thereader assembly.[1] [2][3][2][3][1][3][4][5][2][3][1][3][2][1][2][1][1][2][1][3]