Chapter 33-13F-3-733.2.7.3 Removing the Scanner Unit 0008-98481) Remove the 2 screws [1] from the back; then, shift the scanner unit [2] tothe back, and lift it to detach.F-3-743.2.7.4 Removing the Upper Left Cover 0007-85001) Remove the 2 screws [1]; then, remove the 5 claws [2] to detach the upperleft cover [3].F-3-753.2.8 Face-up cover3.2.8.1 Removing the Fixing Assembly 0011-78481) Turn the lever [1] of the fixing assembly 90 deg in the direction of thearrow.2) While holding the grip [2], slide out the fixing assembly [3] toward thefront and out of the machine.Whenever you have to replace the fixing assembly, be sure to disconnect thepower cord first. Also, be sure to wait unit the fixing assembly has cooledbefore removing it after disconnecting the power cord.F-3-763.2.8.2 Removing the Face-Up Cover 0011-75531) Turn the fixing lever [1] of the fixing assembly 90 deg in the direction ofthe arrow.2) Remove the 4 claws [2], and detach the face-up cover [3] from the fixingassembly.F-3-773.2.9 Main Drive Unit3.2.9.1 Removing the Rear Cover 0007-85531) Disconnect the cable [1] of the power supply assembly.2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.F-3-783) Open the reader assembly [4], and lift to free the 2 claws [5].[1][1][1][2][1][2][1][2][3] [1][1] [1][3] [2][1] [1][2][3][2][3][1][3]
