Canon MF8100 Series Service Manual

Contents

Canon MF8100 Series Service Manual Manual pdf 211 page image

Chapter 33-1213.5.12.2 Removing the Reader Assembly 0007-85751) Open the reader assembly, and remove the left and right E-rings [1]; then,pull out the pin [2].F-3-786When closing the reader assembly, be sure to push in the arm [1] first.F-3-7872) Open the left and right claws in the direction of the arrows, and detach thehinge cover [1].3) Free the 2 harness bands [1], and disconnect the 2 cables [2] connected tothe reader assembly.F-3-7884) Open the harness band [1], and disconnect the 2 cables connected to thereader assembly.F-3-7895) Remove the 6 screws [1], and lift the reader unit to detach.F-3-7903.5.12.3 Removing the Right Cover 0007-85941) Remove the 2 screws [1] of the side; then, remove the 3 claws [2] to detachthe left cover [3].F-3-791F-3-7923.5.12.4 Removing the Left Cover 0007-86191) Remove the 2 screws [1] from the side; then, remove the 3 claws [2] todetach the right cover [3].[2][1][2][1][1][2][1][3][2][2] [1][1][1][1][1][2][2][3]