Chapter 33-1433) Disconnect the 3 connectors [1], and remove the 8 screws [2]; then, detachthe main drive assembly [3].F-3-9293.6.7.13 Removing the Manual Pickup Feed Solenoid 0007-71281) Disconnect the 2 connectors [1], and free the harness [2] from the harnessguide [3].2) Free the cable [1] of the density detection board and the ITB homeposition detection board from the harness guide [2]: then, free the cablefrom the clamp of the pickup solenoid cover [3].3) Remove the screw [4], and detach the pickup solenoid cover [5].F-3-9304) Disconnect the connector [1], and remove the screw [2]; then, detach themanual feed pickup solenoid [3].F-3-9313.6.8 Manual Separation Roller3.6.8.1 Removing the Cassettes 0007-85101) Hold the grip, and take out the cassette.3.6.8.2 Removing the Rear Cover 0007-85111) Disconnect the cable [1] of the power supply assembly.2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.F-3-9323) Open the reader assembly [4], and lift to free the 2 claws [5].F-3-9334) Close the reader assembly; then, detach the rear cover[1].F-3-9343.6.8.3 Removing the Right Cover (with the readerassembly intact) 0007-85121) Free the cable [1] of the reader assembly.[1][1][2][2][3][2][1][1][2][3][4] [5][1][2][3][2][3][1][3][4][5][2][3][1][3]
