Canon MF8100 Series Service Manual

Contents

Canon MF8100 Series Service Manual Manual pdf 148 page image

Chapter 33-58F-3-3733) Open the reader assembly [4], and lift to free the 2 claws [5].F-3-3744) Close the reader assembly; then, detach the rear cover[1].F-3-3753.3.5.2 Removing the Scanner Unit 0009-90181) Remove the platen glass cover.2) While removing the left and right claws, detach the hinge cover [1].3) Remove the screw [2], and detach the cable guide [3].F-3-3764) Open the harness band [1], and free the 2 cables [2] connected to thereader assembly.F-3-3775) Remove the 2 screws [1] from the back; then, shift the scanner unit [2] tothe back, and lift it to detach.F-3-3783.3.5.3 Removing the SCNT Board Unit 0009-90191) Remove the 8 screws [1] from behind the scanner unit, and shift up theSCNT board unit [2].F-3-3792) Open the SCNT board unit; then, disconnect the 6 connectors [1] and the3 flat cables [2].F-3-3803.3.5.4 Removing the ADF Unit 0009-90201) Open the ADF unit [1], and detach the stopper [2].2) Remove the 3 claws [3], and detach the ADF front cover [4].[2][3][1][3][4][5][2][3][1][3][2][1][3][2][2] [1][2][1][1][1][1][2][1][2][1] [2]