Canon MF8100 Series Service Manual

Contents

Canon MF8100 Series Service Manual Manual pdf 101 page image

Chapter 33-11When closing the reader assembly, be sure to push in the arm [1] first.F-3-602) Open the left and right claws in the direction of the arrows, and detach thehinge cover [1].3) Free the 2 harness bands [1], and disconnect the 2 cables [2] connected tothe reader assembly.F-3-614) Open the harness band [1], and disconnect the 2 cables connected to thereader assembly.F-3-625) Remove the 6 screws [1], and lift the reader unit to detach.F-3-633.2.6.3 Removing the Scanner Unit 0008-98431) Remove the 2 screws [1] from the back; then, shift the scanner unit [2] tothe back, and lift it to detach.F-3-643.2.6.4 Removing the Upper Right Cover 0007-84901) Remove the 2 screws [1]; then, remove the 5 claws [2] to detach the upperright cover [3].F-3-653.2.7 Upper Left Cover3.2.7.1 Removing the Rear Cover 0007-84991) Disconnect the cable [1] of the power supply assembly.2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.[1][2][1][3][2][2] [1][1][1][1][2][1][2][2][1][3][1]