Chapter 33-124F-3-8052) Disconnect the connector [1], and remove the 3 screws [2]; then, detachthe rotary drive assembly [3].F-3-806Be sure to tighten the self-tapping screw used to secure the rotary drive as-sembly only at the end of the work.3.5.12.11 Removing the Toner Cartridge Motor 0007-88671) Disconnect the connector [1], and remove the screw [2]; then, detach thetoner cartridge motor [3] from the rotary drive assembly.F-3-8073.6 PICKUP AND FEEDING SYSTEM3.6.1 Cassette Pickup Roller3.6.1.1 Removing the Cassettes 0007-70561) Hold the grip, and take out the cassette.3.6.1.2 Removing the Rear Cover 0007-70571) Disconnect the cable [1] of the power supply assembly.2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.F-3-8083) Open the reader assembly [4], and lift to free the 2 claws [5].F-3-8094) Close the reader assembly; then, detach the rear cover[1].F-3-8103.6.1.3 Removing the Right Cover 0007-70591) Remove the 2 screws [1] of the side; then, remove the 3 claws [2] to detachthe left cover [3].[2][1][1][1][1] [2][2] [3][2][1][2][3][2][3][1][3][4][5][2][3][1][3]
