© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283TROUBLESHOOTING5 - 9954) Toner offsetFig. 5-4Toner offset (Shadow image appears approx. 94 mm toward the dark image.)Defective area Step Check items PrescriptionDensity 1 Is the density too high? Adjust the density.Fuser unit 2 Is the pressure of the fuser roller nor-mal?Check the pressure releasing partsand pressurization mechanism.3 Is the thermistor in contact with thefuser roller?Contact the thermistor with the fuserroller.4 Is there a scratch on the fuser rollersurface?Replace the fuser roller.5 Has the fuser roller reached its PMlife?Replace the fuser roller.6 Is the setting temperature of the fuserroller normal?Check the adjustment values of fuserroller temperature?08-407, 410, 411, 450, 515, 516Paper 7 Has the appropriate paper type beenselected?Select a proper mode.8 Is the setting temperature of the fuserroller in each paper type normal?Check the setting and correct it.08-412, 413, 437, 438, 451, 452,453, 518, 520, 5219 Using the recommended paper? Use the recommended paper.Developer material 10 Using the specified developer mate-rial?Use the specified developer materialand toner.Scanner 11 Are the original glass (especially theposition of shading correction plate),mirror and lens dirty?Clean them.Feeding directionApprox.94mm
