| 
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283ERROR CODE AND SELF-DIAGNOSTIC MODE2 - 24926815-0 Counter Number ofoutput pagesof the FAXprinting /Large1-UP /SimplexprintingFAX 0<8 digits>SYS Counts the number ofoutput pages in thedefault settings.46815-7 1-UP /DuplexprintingFAX 0<8 digits>SYS 48511 General Wide A4 Mode (for PCL) PRT 0<0-1>SYS 0: Disabled1: Enabled18517 General Remote Scan User authen-tication automatic loginALL 1<0-1>SYS 0: OFF (A user alwaysenters manually(current method))1: ON (Previousauthentication infor-mation will be used)18535 Network Storing network logs in theHDDALL 2<1-2>SYS Stores the network logsof SRAM in the HDDwhen network-relatedtrouble occurred.1: Enabled2: Disabled18536 Network Data size when storing net-work logs in the HDDALL 30<1-30>SYS Specifies the size ofnetwork logs to bestored in the HDD.1-30:1-30 MB18548 PaperfeedingOperation of cassette sizechange when printing isinterrupted by size mis-matchPRT 0<0-1>SYS 0: Operation of cassettesize change is disabled.1: Operation of cassettesize change is enabled.18549 Counter Hardware key control whenexternal counter is installedALL 0<0-1>SYS 0: No control1: Mode switch key isdisabled.18823 Network Port number 139 for userauthenticationALL 1<1-2>NIC If the connection to portnumber 139 is blocked,attempt to connect toport number 139 isskipped by setting thiscode to “2: disabled.”This code is enabledwhen “WindowsDomain Authentica-tion” is selected in [UserManagement Setting] -[Authentication] - [UserManagement Setting].1: Enabled2: Disabled129051 UserinterfacePanel calibration settingvalue displayALL 0<0-1>SYS Switches whether thescreen for displayingpanel calibration set-ting values is displayedor not.0: Disabled (screennot displayed)1: Enabled (screendisplayed)19117 Network Raw printing job(Blank page will not beprinted)PRT 0<0-1>SYS 0: OFF1: ON1Setting mode (08) Code Classifi-cation Items Func-tionDefaultablevalue>RAM Contents Proce-dure10/06 |
