e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283 © 2004 - 2010 TOSHIBA TEC CORPORATION All rights reservedERROR CODE AND SELF-DIAGNOSTIC MODE2 - 2663) Details of pixel counter- Toner cartridge reference and service technician referenceThe pixel counter function in this equipment has 2 references, toner cartridge reference and ser-vice technician reference.Toner cartridge referenceThis is a system that accumulates data between the installation of a new toner cartridge and nextinstallation.The installation of new toner cartridge is judged when the total number of pixel count or outputpages after the detection of toner empty has exceeded the threshold.The threshold to be used is selectable in the setting mode (08-1506) between the pixel count andoutput pages (0: Output pages 1: Pixel counter). The threshold of pixel count is set in the settingmode (08-1508) and that of output pages is set in the setting mode (08-1507). When the newtoner cartridge is judged as installed, the data related with the previous cartridge is cleared andreplaced with the data after the installation of new cartridge. Clearing of the counter of the tonercartridge reference is performed in the setting mode (08-1503).Service technician referenceThis is a system that accumulates data between clearing the counter of the service technicianreference by service technician and subsequently clearing the same counter.Clearing of the counter of the service technician reference is performed in the setting mode (08-1502).- Print count (number of output pages)The number of output pages shown at the pixel counter is counted after converting all papersizes to the standard paper size (A4/LT). Printing on other than the standard size is converted bypaper area ratio. The standard paper size is set in the setting mode (08-1500).The examples of conversion are as follows:Ex.)“1” is added to the print count when printing on A4/LT size.“2” is added to the print count when printing on A3/LD size. (area ratio to A4/LT: 200%)“1.49” is added to the print count when printing on B4 size. (area ratio to A4: 149%)“1.27” is added to the print count when printing on LG size. (area ratio to LT: 127%)
