Toshiba e-studio200l Service Handbook

Also see for e-STUDIO200L: User guide Operator's guide Service manual Service manual Service handbook

Contents

e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283 © 2004 - 2010 TOSHIBA TEC CORPORATION All rights reservedADJUSTMENT3 - 303.5 Image Quality Adjustment (Scanning Function)3.5.1 Density adjustmentAdjusts the center density and the variation of density adjustment button.< Adjustment Mode (05) >(1) While pressing [0] and [5] simultaneously, turn the power ON.(2) Key in a code and press the [START] button.(3) Key in an adjustment value.(To correct the keyed-in value, press the [CLEAR] button.)(4) Press the [ENTER] or [INTERRUPT] button to store the value. The equipment goes back to theready state.(5) Turn the power OFF and then back ON to perform scanning job.(6) If the desired image density has not been attained, repeat step (2) to (5).Original mode Item to be adjusted RemarksText/Photo Photo Text845 847 846 Manual density mode centervalueThe larger the value is, the darker theimage becomes.Acceptable values: 0 to 255850 852 851 Manual density mode lightstep valueThe larger the value is, the lighter thelight side becomes.Acceptable values: 0 to 255855 857 856 Manual density mode darkstep valueThe larger the value is, the darker thedark side becomes.Acceptable values: 0 to 255860 862 861 Automatic density mode The larger the value is, the darker theimage becomes.Acceptable values: 0 to 255