| 
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283ERROR CODE AND SELF-DIAGNOSTIC MODE2 - 2572<>• The management items at PM support mode can also be operated at setting mode (08).The following items are displayed or set by using sub-codes at PM management setting in the tablebelow.0: Present number of output pages- Means the present number of output pages.1: Recommended number of output pages for replacement- Means the recommended number of output pages for replacement.2: Number of output pages at the last replacement- Means the number of output pages at the last replacement.3: Present driving counts- Means the present drive counts (1 count = 2 seconds).4: Recommended driving counts to be replaced- Means the recommended drive counts for replacement (1 count = 2 seconds).5: Driving counts at the last replacement- Means the drive counts at the last replacement.6: Present output pages for control- Means the present number of output pages for controlling.7: Present driving counts for control- Means the present drive counts for controlling (1 count = 2 seconds).8: Number of times replaced- Counts up when clearing the counter of each unit in the PM Support Mode Screen.Notes:• Sub-code 3 is equivalent to sub-code 7.• When the value of sub-code 3 is changed, the value of sub-code 7 is also updated and viceversa.• When “0” is set at one of sub-codes 0, 3, 6 and 7, the rest of them are automatically updatedto “0”.05/12 |
