Toshiba e-studio200l Service Handbook

Also see for e-STUDIO200L: User guide Operator's guide Service manual Service manual Service handbook

Contents

© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283TROUBLESHOOTING5 - 695[CC50] Horizontal registration motor abnormalityMJ-1025Is the horizontal registration home position sensor (PI2P) working properly? NO  Replace the sensor.YESIs the wiring between the finisher controller PC board and the horizontal registration homeposition sensor (PI2P) correct? NO  Correct the wiring.YESIs there any problem with the horizontal registration mechanism? YES  Fix the mechanism.NOReplace the horizontal registration motor (M2P).Try replacing the punch controller PC board. Is the problem corrected? YES  End.NOReplace the finisher controller PC board.[CC60] Punch motor abnormalityMJ-1025Is the punch home position sensor (PI1P) working properly? NO  Replace the sensor.YESIs the punch motor clock sensor (PI3P) working properly? NO  Replace the sensor.YESIs the wiring between the finisher controller PC board and sensor correct? NO  Correct the wiring.YESIs there any problem with the punching mechanism? YES  Fix the mechanism.NOReplace Punch motor (M1P)Try replacing the punch controller PC board. Is the problem corrected? YES  End.NOReplace the finisher controller PC board.