e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283 © 2004 - 2010 TOSHIBA TEC CORPORATION All rights reservedSPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES1 - 4Eliminated portion.................... Leading edges: 3.0±2.0 mm, Side/trailing edges: 2.0±2.0 mm (copy)Leading / trailing edges: 5.0±2.0 mm, Side edges: 5.0±2.0 mm (print)Paper feeding .......................... Standard drawers:1 or 2 drawers (stack height 60.5 mm, equivalent to 550 sheets;64 to 80 g/m 2 (17 to 22 lb. Bond)): Depends on destinations orversions.PFP:Option (One drawer or two: stack height 60.5 mm, equivalent to550 sheets; 64 to 80 g/m 2 (17 to 22 lb. Bond))LCF:Option (Stack height 137.5 mm x 2: equivalent to 2500 sheets;64 to 80 g/m 2 (17 to 22 lb. Bond))Bypass feeding:Stack height 11 mm: equivalent to 100 sheets; 64 to 80 g/m2 (17to 22 lb. Bond)Capacity of originals in the reversing automatic document feeder (Option).................................................. A3 to A5-R, LD to ST-R:100 sheets / 80 g/m 2 (Stack height 16 mm or less)Automatic duplexing unit (ADU is available as standard equipment for some destinations or versions.).................................................. Stackless, Switchback typeToner supply ............................ Automatic toner density detection/supplyToner cartridge replacing method (There is a recovered toner supplymechanism.)Density control......................... Automatic density mode and manual density mode selectable in 11stepsWeight ..................................... Approximately 75 kg (165.34 lb.): e-STUDIO200L/230/230L/280/280SApproximately 77 kg (169.75 lb.): e-STUDIO202L/203L/232/233/232S/282/282S/283 (include the developer material and drum) (The ADUand Drawer module are installed.)Power requirements ................ AC 110 V / 13.2 A, 115 V or 127 V / 12 A220-240 V or 240 V / 8 A (50/60 Hz)* The acceptable value of each voltage is ±10%.Power consumption................. 1.5 kW or less (115 V series, 200 V series)* The electric power is supplied to the RADF, (ADU), Finisher, Job Separator, Offset Tray, PFP andLCF through the equipment.Total counter............................ Electronical counter07/11
