OneStart

Menu

Toshiba e-STUDIO280 manuals

e-STUDIO280 first page preview

e-STUDIO280

Brand: Toshiba | Category: All in One Printer
Table of contents
  1. TABLE OF CONTENTS
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. NOTICE TO USERS
  6. TOSHIBA QUALITY IS SECOND TO NONE
  7. PREFACE
  8. FEATURES OF THE e-STUDIO230/280
  9. GENERAL PRECAUTIONS
  10. When Using the Multifunctional Digital Systems
  11. During Maintenance or Inspection
  12. When Handling Supplies
  13. DISCLAIMER NOTICE
  14. 1. BEFORE USING EQUIPMENT
  15. BEFORE USING EQUIPMENT
  16. DESCRIPTION OF EACH COMPONENT
  17. Optional Equipment
  18. Control Panel
  19. Adjustment of the Angle of the Control Panel
  20. Touch Panel
  21. clearing the functions selected
  22. setting letters
  23. TURNING ON THE POWER SWITCH
  24. Controlling the Use of the Copier with Department Codes
  25. Controlling the Use of the Copier Using the Optional Key Copy Counter
  26. SWITCHING TO THE ENERGY-SAVING MODE
  27. SETTING COPY PAPER
  28. Toshiba-Recommended Paper/Handling and Storing Paper
  29. Changing the Paper Size of the Drawer/Setting the Drawer for Special Uses
  30. the control panel
  31. clearing the drawer for special uses
  32. 2. HOW TO MAKE COPIES
  33. HOW TO MAKE COPIES
  34. SETTING ORIGINALS
  35. When Placing an Original on the Glass
  36. book-type originals
  37. When Using the Reversing Automatic Document Feeder (optional)
  38. in the continuous feed mode
  39. GENERAL COPYING PROCEDURES
  40. start button
  41. AUTO JOB START (JOB PRESET)
  42. confirming and canceling auto job start
  43. INTERRUPT COPYING
  44. STOPPING THE COPY OPERATION
  45. BYPASS COPYING
  46. Bypass Copying on Standard Size Paper
  47. Bypass Copying on Non-Standard-Size Paper
  48. Storing a Non-Standard Size in MEMORY
  49. Before copying on an envelope
  50. Copying on an envelope
  51. place the original on the original glass
  52. media type
  53. Table Of Contents
  54. SETTING OF BASIC COPY MODES
  55. Manual Paper Selection
  56. Setting the [OTHER SIZE] button
  57. Setting the [MIXED ORIGINAL SIZE]
  58. REDUCTION AND ENLARGEMENT COPYING
  59. specifying both original size and copy size
  60. SELECTING FINISHING MODES
  61. Sort/Group Copying
  62. Rotate Sort Mode
  63. Staple Sorting
  64. Magazine Sort & Saddle Stitch Mode (Booklet Mode)
  65. set the paper size
  66. available conditions for saddle stitch
  67. Hole Punch Mode (Optional)
  68. DUPLEX COPYING
  69. ORIGINAL MODE
  70. COPY DENSITY ADJUSTMENT
  71. IMAGE EDITING AND IMAGE ADJUSTMENT
  72. BACKGROUND ADJUSTMENT
  73. SHARPNESS ADJUSTMENT
  74. FUNCTIONS
  75. Table Of Contents
  76. USING THE EDITING FUNCTIONS
  77. creating a bookbinding margin
  78. EDGE ERASE
  79. BOOK CENTRE ERASE
  80. DUAL-
  81. copy size
  82. MAGAZINE SORT (FROM THE EDITING MENU)
  83. IMAGE EDITING
  84. Mirror Image
  85. Negative/Positive Reversal
  86. X-Y ZOOM
  87. COVER COPYING
  88. SHEET INSERTION MODE
  89. TIME & DATE STAMP
  90. PAGE NUMBERING
  91. JOB BUILD
  92. direction of duplex copy images in "2 to
  93. CONTINUOUS/SINGLE ORIGINAL FEEDING
  94. single-feed mode
  95. STORING ORIGINALS
  96. STORE TO e-FILING
  97. COPY & FILE
  98. SCANNING THE IMAGES
  99. SCAN SETTING IN THE TOUCH PANEL
  100. SCAN TO e-FILING
  101. SCAN TO FILE
  102. SCAN TO E-MAIL
  103. Table Of Contents
  104. INTERNET FAX
  106. SENDING INTERNET FAX
  107. Specifying the Recipients
  108. address book entry
  109. group entry
  110. searching by address
  111. searching address using ldap server
  112. multi-address transmission
  113. confirming the destinations
  114. Advanced Function
  115. priority transmission
  116. RECEIVING INTERNET FAX
  117. receiving from smtp server
  118. JOB STATUS
  120. PRINT JOB LIST
  121. PROOF PRINT JOB
  122. deleting a job
  123. PRIVATE PRINT JOB
  124. WHEN USING THE DEPARTMENT CODES
  125. CONFIRMING THE STATUS OF FAX/INTERNET FAX JOB
  126. CONFIRMING THE STATUS OF SCAN
  127. LOG LIST
  128. scan log
  129. ADDRESS REGISTRATION FROM LOG LISTS
  130. PRINTING SEND/RECEIVE LOG LIST OF FAX
  131. STATUS
  132. ERROR CODE
  133. e-FILING
  134. e-FILING FUNCTIONS
  135. SETTING UP BOX
  136. CHANGING INPUT DATA
  137. DELETING BOX
  138. PRINTING STORED DOCUMENT
  139. TEMPLATE
  141. RECALLING TEMPLATE
  142. REGISTERING TEMPLATE
  144. changing the data of user group
  145. DELETING TEMPLATE
  146. WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
  147. DESCRIPTION OF THE BLINKING GRAPHIC SYMBOLS
  148. REPLACE TONER CARTRIDGE SYMBOL
  149. CLEAR PAPER SYMBOL
  150. misfed paper
  151. ADDING STAPLES (OPTIONAL)
  152. Table Of Contents
  153. REMOVING JAMMED STAPLES (OPTIONAL)
  154. DISPOSING OF THE PUNCHED PAPER BITS (OPTIONAL)
  155. CALL SERVICE SYMBOL/PERIODIC MAINTENANCE MESSAGE
  156. MAINTENANCE
  157. DAILY INSPECTION
  158. cleaning the charger
  159. SIMPLE TROUBLESHOOTING
  160. image density is too low
  161. images are stained
  162. functions cannot be set
  163. specifications
  164. SPECIFICATIONS & OPTIONS
  165. SPECIFICATIONS OF OPTIONS
  166. PACKING LIST
  167. COPYING FUNCTION COMBINATION MATRIX
  168. Combination Matrix 2/2
  169. Table Of Contents
  170. Table Of Contents
  171. Table Of Contents
  172. Table Of Contents
e-STUDIO280 first page preview

e-STUDIO280

Brand: Toshiba | Category: All in One Printer
Table of contents
  1. touch panel
  2. sheet originals
  3. key operator functions
  4. paper misfeed in the drawer feeding area
  5. displaying scan counter
  6. displaying print counter for department code
  7. displaying scan counter for department code
e-STUDIO280 first page preview

e-STUDIO280

Brand: Toshiba | Category: All in One Printer
Table of contents
  1. SOFTWARE LICENSE AGREEMENT
  2. TRADEMARKS AND COPYRIGHT
  3. Preface
  4. Table of Contents
  5. Table Of Contents
  6. Overview
  7. Features and Functions
  8. TopAccess End-User Mode
  9. TopAccess Overview
  10. Accessing TopAccess End-User Mode
  11. TopAccess Web Site
  12. Checking Device Status
  13. Managing Jobs
  14. Deleting a Print Job
  15. Managing Fax/Internet Fax Jobs
  16. Deleting a Fax Transmission Job
  17. Managing Scan Jobs
  18. Deleting a Scan Job
  19. Displaying Job Logs
  20. Displaying Transmission Journals
  21. Displaying Reception Journals
  22. Displaying Scan Job Logs
  23. Managing Templates
  24. Setting Group Password
  25. Resetting Group Information
  26. Registering Private Templates
  27. Panel Setting
  28. Destination Setting
  29. Internet Fax Setting
  30. Fax Setting
  31. Email Setting
  32. Save as file Setting
  33. Box Setting
  34. Setting Template Password
  35. Resetting Private Templates
  36. Displaying Public Templates
  37. Managing Address Book
  38. Adding New Contact from the LDAP Server
  39. address book
  40. Managing Groups in the Address Book
  41. deleting a group
  42. Managing Mailboxes
  43. Setting Up an Open Mailbox
  44. MailBox Setting
  47. Deleting an Open Mailbox
  48. Managing Counters
  49. Troubleshooting
  50. TopAccess Errors
  51. Scan Job Status Messages
  52. INDEX
e-STUDIO280 first page preview

e-STUDIO280

Brand: Toshiba | Category: All in One Printer
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
  6. specifications
  7. Accessories
  8. Options
  9. e-STUDIO200L/230/230L/280/280S
  10. Supplies
  11. e-STUDIO202L/232/232S/282/282S
  12. System List
  14. ERROR CODE AND SELF-DIAGNOSTIC MODE
  15. Service call
  16. Error in Internet FAX / Scanning Function
  17. Printer function error
  18. Self-diagnosis Modes
  19. Input check (Test mode 03) (e-STUDIO200L/230/280)
  20. Input check (Test mode 03) (e-STUDIO202L/232/282)
  21. Output check (test mode 03)
  22. Test print mode (test mode 04)
  23. Adjustment mode (05) (e-STUDIO200L/230/280)
  24. Adjustment mode (05) (e-STUDIO202L/232/282)
  25. Setting mode (08) (e-STUDIO200L/230/280)
  26. Setting mode (08) (e-STUDIO202L/232/282)
  27. Pixel counter
  28. Classification List of Adjustment Mode (05) / Setting
  29. ADJUSTMENT
  30. Image Dimensional Adjustment
  31. Paper alignment at the registration roller
  32. Printer related adjustment
  33. Scanner related adjustment
  34. Image Quality Adjustment (Copying Function)
  35. Gamma slope adjustment
  36. Sharpness adjustment
  37. Setting range correction
  38. Adjustment of smudged/faint text
  39. Adjustment of image density
  40. Image Quality Adjustment (Printing Function)
  42. Image Quality Adjustment (Scanning Function)
  45. Setting range correction (Adjustment of background peak)
  46. Adjustment of High-Voltage Transformer
  47. Precautions
  48. Adjustment of the Scanner Section
  49. Lens unit
  50. Adjustment of the Paper Feeding System
  51. Adjustment of Developer Unit
  52. Adjustment of the RADF (MR-3016)
  53. Adjustment of RADF height
  54. Adjustment of skew
  55. Automatic adjustment of sensors and initialization of EEPROM
  56. Adjustment of aligning
  57. Adjustment of aligning at reversing
  58. Adjustment of reverse solenoid
  59. Adjustment of RADF opening/closing switch
  60. Adjustment of RADF opening/closing sensor
  61. Adjustment of tray volume
  62. Adjustment of the RADF (MR-3020)
  65. Adjustment of the Leading Edge Position
  66. Adjustment of Horizontal Position
  67. Adjustment of Copy Ratio
  69. Adjustment of the Finisher (MJ-1022)
  70. Adjusting the angle of the jogging plate
  71. Adjusting the overlap of the sensor flag
  72. Adjusting the tension of the stack processing motor belt
  73. Releasing the stack tray guide lever fixing plate
  74. Adjustment of the upper tray angle
  75. DIP switch functions
  76. Adjustment of the Finisher (MJ-1025)
  77. Adjusting the sensor output (Electrical system (Puncher unit; option))
  78. Registering the number of punch hole (Electrical system (Puncher unit; option))
  79. After replacing the EEP-ROM (IC1002 Electrical system (Puncher unit; option))
  80. Key Copy Counter (MU-8, MU-10)
  81. Adjustment of Dogleg
  82. PREVENTIVE MAINTENANCE (PM)
  83. Work flow of parts replacement
  84. General Descriptions for PM Procedure
  85. Operational Items in Overhauling
  86. Preventive Maintenance Checklist
  87. Jig List
  88. Grease List
  89. Precautions for Storing and Handling Supplies
  90. Checking and cleaning of photoconductive drum
  91. Checking and cleaning of drum cleaning blade
  92. TROUBLESHOOTING
  93. Paper misfeeding
  94. Cover open jam
  95. Transport jam (RADF)
  96. Finisher jam
  97. Drive system related service call
  98. Paper feeding system related service call
  99. Scanning system related service call
  100. Fuser unit related service call
  101. Communication related service call
  102. RADF related service call (MR-3016)
  103. RADF related service call (MR-3020)
  104. Finisher related service call
  105. Service call for others
  107. Troubleshooting for the Image
  108. Replacement of PC Boards and HDD
  109. Replacing SYS board
  110. Caution when Data overwrite kit (GP-1050/1060) is installed
  111. FIRMWARE UPDATING
  112. Firmware Updating with Download Jig (e-STUDIO200L/230/280)
  113. PWA-DWNLD-350-JIG2 (48 MB)
  114. PWA-DWNLD-350-JIG1 (16 MB)
  115. Writing the data to the download jig (PWA-DWNLD-350-JIG)
  116. K-PWA-DLM-320
  117. Firmware Updating with Download Jig (e-STUDIO202L/232/282)
  121. Firmware Updating with FSMS (Field Service Manager) (e-STUDIO200L/230/280)
  122. Firmware Updating with USB Storage Device (e-STUDIO200L/230/280)
  123. Firmware Updating with USB Storage Device (e-STUDIO202L/232/282)
  124. Appendix
  125. e-STUDIO202L/232/282
  126. POWER SUPPLY UNIT
  127. Fuse
  128. Configuration of Power Supply Unit
  129. REMOTE SERVICE
  130. Setting Item
  131. Setting procedure
  132. Order Sheet Format
  133. Service Notification
  134. Items to be notified
  135. AC Wire Harness
e-STUDIO280 first page preview

e-STUDIO280

Brand: Toshiba | Category: All in One Printer
Table of contents
  1. service manual
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
  6. Accessories
  7. Options
  8. e-STUDIO202L/203L/232/232S/233/282/282S/283/283S
  9. Supplies
  10. System List
  12. OUTLINE OF THE MACHINE
  13. Electric Parts Layout
  14. front side
  15. Symbols and Functions of Various Components
  16. PC BOARDS
  17. General Description
  18. Construction of boards
  19. Installation and Replacement of Covers and PC Boards
  21. Installation and Replacement of Options
  22. COPY PROCESS
  23. Details of Copying Process
  24. Comparison with e-STUDIO350/450
  25. GENERAL OPERATION
  26. Description of Operation
  27. Drawer feed copying (Upper drawer paper feeding)
  28. Bypass feed copying
  29. Detection of Abnormality
  30. Description of abnormality
  31. Flow Chart
  32. Automatic paper feed copying
  33. CONTROL PANEL
  34. Items Shown on the Control Panel
  35. Display
  36. Relation between the Equipment State and Operator's Operation
  38. LED display circuit
  39. Disassembly and Replacement
  40. SCANNER
  41. Construction
  43. Scanning drive circuit
  44. Initialization at power-ON
  45. Control of Exposure Lamp
  46. Exposure lamp
  47. Control circuit for the exposure lamp
  48. General Description of CCD Control
  49. Automatic Original Size Detection Circuit
  50. Process of detection of original size
  52. IMAGE PROCESSING
  53. Configuration
  54. SLG Board
  55. LGC Board
  56. Laser Driving PC Board
  57. LASER OPTICAL UNIT
  58. Structure
  59. Laser Diode
  60. Polygonal Motor
  61. Internal cooling fan-2
  63. PAPER FEEDING SYSTEM
  64. Operation
  65. Operation of drawer pickup roller
  66. Separation of paper
  67. Operation of clutch
  69. Drive Circuit of Tray-up Motor
  71. DRIVE SYSTEM
  72. Functions
  73. Main Motor
  74. Control signals
  76. DRUM RELATED SECTION
  78. High-Voltage Transformer Output Control Circuit
  80. Drum Temperature Detection Circuit
  81. Temperature/Humidity Detection Circuit
  83. DEVELOPMENT SYSTEM
  85. Recovered toner supply mechanism
  86. Drive Circuit of Toner Motor
  87. Auto-Toner Circuit
  88. Function of auto-toner sensor
  90. FUSER UNIT
  93. Heater Control Circuit
  94. Temperature detection section
  96. paper exit section
  97. Control Circuit of Exit Motor
  98. Exit Motor Drive
  100. AUTOMATIC DUPLEXING UNIT (ADU) (OPTION: MD-0102)
  101. Description of Operations
  102. Drive of ADU
  105. POWER SUPPLY UNIT
  106. Operation of DC Output Circuits
  107. Output Channel
  108. Fuse
  109. Configuration of Power Supply Unit
  110. Sequence of Power Supply
  111. AC Wire Harness
e-STUDIO280 first page preview

e-STUDIO280

Brand: Toshiba | Category: All in One Printer
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. WIRE HARNESS CONNECTION DIAGRAMS
  6. SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
  7. Accessories
  8. Options
  9. e-STUDIO202L/203L/232/232S/233/282/282S/283/283S
  10. Supplies
  11. System List
  13. ERROR CODE AND SELF-DIAGNOSTIC MODE
  14. Service call
  15. Error in Internet FAX / Scanning Function
  16. Printer function error
  17. Self-diagnosis Modes
  18. Input check (Test mode 03) (e-STUDIO200L/230/230L/280)
  19. Input check (Test mode 03) (e-STUDIO202L/203L/232/233/282/283)
  20. Output check (test mode 03)
  21. Test print mode (test mode 04)
  22. Adjustment mode (05) (e-STUDIO200L/230/230L/280)
  23. Adjustment mode (05) (e-STUDIO202L/203L/232/233/282/283)
  24. Setting mode (08) (e-STUDIO200L/230/230L/280)
  25. Setting mode (08) (e-STUDIO202L/203L/232/233/282/283)
  26. Pixel counter
  27. Classification List of Adjustment Mode (05) / Setting
  28. ADJUSTMENT
  29. Image Dimensional Adjustment
  30. Paper alignment at the registration roller
  31. Printer related adjustment
  32. Scanner related adjustment
  33. Image Quality Adjustment (Copying Function)
  34. Gamma slope adjustment
  35. Sharpness adjustment
  36. Setting range correction
  37. Adjustment of smudged/faint text
  38. Adjustment of image density
  39. Image Quality Adjustment (Printing Function)
  41. Gamma balance adjustment < e-STUDIO 202L/203L/232/233/282/283 >
  42. Image Quality Adjustment (Scanning Function)
  45. Setting range correction (Adjustment of background peak)
  46. Adjustment of High-Voltage Transformer
  47. Precautions
  48. Adjustment of the Scanner Section
  49. Lens unit
  50. Adjustment of the Paper Feeding System
  51. Adjustment of Developer Unit
  52. Adjustment of the RADF (MR-3016)
  53. Adjustment of RADF height
  54. Adjustment of skew
  55. Automatic adjustment of sensors and initialization of EEPROM
  56. Adjustment of aligning
  57. Adjustment of aligning at reversing
  58. Adjustment of reverse solenoid
  59. Adjustment of RADF opening/closing switch
  60. Adjustment of RADF opening/closing sensor
  61. Adjustment of tray volume
  62. Adjustment of the RADF (MR-3020)
  65. Adjustment of the Leading Edge Position
  66. Adjustment of Horizontal Position
  67. Adjustment of Copy Ratio
  69. Adjustment of the Finisher (MJ-1022)
  70. Adjusting the angle of the jogging plate
  71. Adjusting the overlap of the sensor flag
  72. Adjusting the tension of the stack processing motor belt
  73. Releasing the stack tray guide lever fixing plate
  74. Adjustment of the upper tray angle
  75. DIP switch functions
  76. Adjustment of the Finisher (MJ-1025)
  77. Adjusting the sensor output (Electrical system (Puncher unit; option))
  78. Registering the number of punch hole (Electrical system (Puncher unit; option))
  79. After replacing the EEP-ROM (IC1002) (Electrical system (Puncher unit; option))
  80. Key Copy Counter (MU-8, MU-10)
  81. Adjustment of Dogleg
  82. PREVENTIVE MAINTENANCE (PM)
  83. Work flow of parts replacement
  84. General Descriptions for PM Procedure
  85. Operational Items in Overhauling
  86. Preventive Maintenance Checklist
  87. Jig List
  88. Grease List
  89. Precautions for Storing and Handling Supplies
  90. Checking and cleaning of photoconductive drum
  91. Checking and cleaning of drum cleaning blade
  92. TROUBLESHOOTING
  93. Paper misfeeding
  94. Cover open jam
  95. Transport jam (RADF)
  96. Finisher jam
  97. Drive system related service call
  98. Paper feeding system related service call
  99. Scanning system related service call
  100. Fuser unit related service call
  101. Communication related service call
  102. RADF related service call (MR-3016)
  103. RADF related service call (MR-3020)
  104. Finisher related service call
  105. Service call for others
  107. Troubleshooting for the Image
  108. Replacement of PC Boards and HDD
  109. Replacing SYS board
  110. Caution when Data overwrite kit (GP-1050/1060) is installed
  111. Replacing or clearing NVRAM
  112. FIRMWARE UPDATING
  113. Firmware Updating with Download Jig (e-STUDIO200L/230/230L/280)
  114. PWA-DWNLD-350-JIG2 (48 MB)
  115. PWA-DWNLD-350-JIG1 (16 MB)
  116. Writing the data to the download jig (PWA-DWNLD-350-JIG)
  117. K-PWA-DLM-320
  118. Firmware Updating with Download Jig (e-STUDIO202L/203L/232/233/282/283)
  122. Firmware Updating with FSMS (Field Service Manager) (e-STUDIO200L/230/230L/280)
  123. Firmware Updating with USB Storage Device (e-STUDIO200L/230/230L/280)
  124. Firmware Updating with USB Storage Device (e-STUDIO202L/203L/232/233/282/283)
  125. Appendix
  126. e-STUDIO202L/203L/232/233/282/283
  127. POWER SUPPLY UNIT
  128. Fuse
  129. Configuration of Power Supply Unit
  130. REMOTE SERVICE
  131. Setting Item
  132. Setting procedure
  133. Order Sheet Format
  134. Service Notification
  135. Items to be notified (e-STUDIO200L/230/230L/280)
  136. Setting (e-STUDIO202L/203L/232/233/282/283)
  137. Items to be notified (e-STUDIO202L/203L/232/233/282/283)
  138. AC Wire Harness
e-STUDIO280 first page preview

e-STUDIO280

Brand: Toshiba | Category: All in One Printer
Related products
e-STUDIO280Le-STUDIO280Se-studio2809ae-STUDIO283e-STUDIO282e-STUDIO2803AMe-STUDIO282Se-STUDIO282Le-studio281ce-STUDIO283C
Toshiba categories
Laptop
Air Conditioner
TV
LCD TV
All in One Printer
LED TV
Projector
DVD Player
Storage
Heat Pump
More Toshiba categories
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved